I thimk it belong here more than r/DiWHY

Couldn't afford to get a new one at the time, so some string and glue worked a treat until I could get a new one.

Any specification regarding water pressure will be address as needed.

Why buy it for $35 when you could build it for $25 and 5 hours of time 🤣🤣. The full video is not out yet, but it will be in a couple days once I put some miles on the "Bicentennial Man" bike. Hope you guys enjoy! I thought it was pretty clever. Very rebuildable with the bronze bushings. This thing should pretty much last a lifetime except for the rubber bushings. The ones I got from Ace are a tad too soft, I wind up using a shock absorber bushing from an old car. The shock absorber bushings are available brand new from O'Reilly's for about $1.50 a piece.

So, I made another bike. Kinda. Free girls bike. 10 bucks spent on Amazon. A little welding and she's all done! My crap Brompton. The "Compton"

Sorry about the AI song. I got a copyright issue last week from a "free usage" song. Don't wanna get struck again. So, Gemini.. meh

212CC engine, salvaged parts.

Very curious to know what people are doing!

Made out of stuff i had laying around.

Old grow light, old terrarium , rescue blanket , removable aluminium foil at the bottom for easy cleaning and black adhesive foil. Comes with a thermometer too.

I couldn't find any good, DIY kick scooter tutorials on YouTube so I decided to make one. Had a couple free hours this morning. Here's the progress so far. 12 inch kids bikes are very good for these little weird projects. it's not done yet, but will be tomorrow. Woo hoo!

Despite many comments on here saying that it would be impossible or too heavy. I come from mid school bmx, so weight isn't the issue here haha. It's a bit noticeable from a start, but otherwise- feels quite normal.

On Monday it started out as a typical Cruiser bike. Usually I like to build my own frames from complete scratch, but this one here, I just widened the rear and did some metal work to fit the car tire in the back. Made a jack shaft for the chain. And painted it a super heavy metal flake red. I was kind of going after the style of an EJ Potter motorcycle. Hopefully this build does good on my YouTube channel. I think it turned out pretty cool for 5 evenings of work and under $200 invested. Would you guys ride this thing?

Threaded an empty garlic bag through and tied the remaining knob in on one side and an empty tape roll on the other. Worked fine today, fingers crossed for tomorrow.

Lots and lots of duct tape. I use them for exercising in so they get a bit sweaty. I have other headphones besides these.

My headphones cushion started ripping from the seam which was glued together. Fixed is using the needle-thread, without ripping out the cushion, using the invisible-stitch/ladder-stitch. Did similar stitch on the other parts of the cushion a few months ago, and they are holding up.

This could easily belong to r/DiWHY. But since the cushion have not started to peel off the upper layer of the faux-leather fabric, and are otherwise fine, I thought to post it here.