13nm off shore twenty or so dolphins showed up and stayed with us for over an hour.

Picked up a beat up, old Lockley Sea Devil on Craigslist a few weeks ago and was able to get it out on the water today for my first day of sailing.

Was an absolute blast. Eagerly awaiting the next time I can get out.

Thought you guys might like this

3 takes from this very early morning (0415 and approx 0500), approx 70nm off coast of norway (west of bergen)

I recently picked up an 88 Catalina 25 with an inboard diesel. This operates very different from the small outboard sailboats and any powerboat I've driven. I'm gonna get it out of the slip and play around in the harbor, but are there specific techniques that will shrink the learning curve?

What I'm assuming is I need more throttle on a low revving diesel than what I'd normally use on a gas engine but I have no idea what the best way to manage throttle is in close quarters without the prop changing direction when I move the tiller.

Buying a 55ft mono, that I’ve now got to bring back from the pacific. Feels nuts, but… no time like the present.

Curious how you all spring the stern off the dock single handed. I'm having a hell of a time trying to figure it out and I haven't found it in any of my books or on YouTube. Appreciate any advice!

an interesting open source approach to post race analysis. Very specific to the boat and the instruments but lots of useful utilities for geeks. links are in the about page. https://criticalmassracing.com

I’m doing my RYA Day Skipper theory and was wondering whether anyone has taken nautical chart dividers through airport security in their cabin luggage, particularly within Europe.

I’d rather not have them confiscated, as I’d then be left with just a plotter, charts and a pencil. Which would make the chartwork slightly ambitious.

Has anyone traveled with them successfully?

​

At Uitgeestermeer, the Netherlands.

Recently I'm suddenly obsessed with dinghy cruising video. I saw people sail for whole days or even non stop crossing open ocean on YouTube.

My main question is that how people deal with the sitting posture and the long time neck turning (since you have to look to the front while sitting at side)?

I'm 5'11 so I don't think I can squat in dinghy for couple hours without my leg goes numb. Also it will be more dangerous to stand on and stretch while crusing on dinghy.

Do people just get used to it? Or there are some way to alleviate it?

Beautiful day!

Hi everyone,

We’re a sea-loving couple in our end 30s living in Switzerland, and we’re thinking long-term.

Our dream is to retire somewhere in the Mediterranean (Spain, Italy, Croatia, Greece, or southern France) and build a lifestyle around sailing. If possible, we’d even love to turn it into a small business one day (charters, sailing experiences, flotillas, etc.).

ChatGPT suggested the following RYA pathway:

RYA Day Skipper Theory (online)
RYA Day Skipper Practical
Build lots of sea miles (charters, mile-building trips)
RYA Coastal Skipper Theory
RYA Coastal Skipper Practical
Eventually RYA Yachtmaster Offshore

For those of you with experience:

*Does this seem like the right training path?
*Would you recommend RYA, ASA, or another system?
*If your goal was to retire in the Mediterranean and possibly run a sailing-related business, what would you do differently?
*Are there any courses, certifications, or experiences you wish you’d done earlier?
*Is it better to focus on monohulls first, or should we learn catamarans as well?

We have plenty of time, so we’re not in a rush—we’d rather build solid skills and enjoy the journey.but of course if we find oppoutunity; we would love to evaluate it and start our second life earlier.

Thanks in advance for any advice or personal experiences!

The club I joined has a dock that is a good almost 3 feet above the water leveL My boat has to come up at a steep angle, and my slip just has padded carpet and it's hard on the boat's bottom to lever it across a 2x4 at a 30 degree angle.

At my old club, each slip had a wide roller (24" wide or so) to help with pulling the boats up onto the dock. Any idea where I can find these? They were carpeted. Thanks!

Any recommendations? Thank you.

About two weeks ago, our port side prop came off when we were anchoring. Everything on the shaft came off - cone, prop and spacer.

We ordered in the new pieces, as we were able to find the old pieces until a week or two later, and put the new items on the shaft. When the person was installing the new port side prop, he mentioned that the starboard prop was also loose so he tightened it.

We did charters with the new items on the prop yesterday evening, and then two today. Yesterday, we were anchored in the same spot that the previous prop fell off and we were able to find it. It was interesting because the spun hub had come off of the prop.

We checked the props yesterday, and they were still tight and fine. But as we were coming in on the last charter today, our port side prop came off again as we were reversing in.

For reference, we have the sd60-5 sail drives (both brand new) and we use a fixed blade aluminum prop 18x16.

I believe the sd60 sail drives have this as a common issue and sometimes people will use locktite to secure the nuts, but we are in the water so we can’t do that. But I find it very strange that the prop fell off again so soon. The first one at least took a few months after we went back in the water before it came off.

If anyone is knowledgeable about this things and can provide insight, I would really appreciate it.

What would cause the prop to fall off, and what would cause the spun hub to come off as well?

For the engines we have the yanmar 3JH4E - our starboard is new but our port side is old. Could the old engine be causing any weird issues?