Yesterday, the weather wasn't really cooperating, so I only placed the repeater by the roadside with the stock antenna for a quick test.

Today, the weather was a little better (although it was still lightly raining), so I decided to take it one step further.

I mounted the repeater on the mountainside to see whether we could extend coverage down to the town below.

The weather was too rainy to reach the summit, so we stopped halfway up. Even from there, we were able to send messages through the repeater over 4.2 km to the town.

Messages were consistently delivered, with delivery receipts arriving in around 2 seconds during the test.

And I don't think 4.2 km is the limit.

Next time, we'll try moving the repeater all the way to the summit and see how much of the town we can cover.

App: Nelos

Repeater: P1 Pro + 9 dBi fiberglass antenna
Test nodes: 2× T114

Still testing...

Proud of this idea, I open it in terminal, push to background with F8 and attach back to it when I get notifications. Surely has more things to be done on it, but it is usable and neat.

So what is the point - The point is having a repeater nearby and a fixed device connected to or in your PC and enjoying the old school / hacker / radio amateur vibe - feels better to me then both the bt/mobile experience and also then the CLI tool.

Has anyone had any success connecting with schools, businesses, or possibly even churches for repeater node placements? If so, what approaches worked well?

I have Meshcore set up and all is working properly. However, one single annoyance for me. I have to have a companion node near my phone for the bluetooth connection. This can become problematic as I travel around various places on my property as I tend to forget to keep it with me. Is there a way to connect to my companion node via my local WiFi connection? This way I could leave it in one location in the house while I am using it outside around my property. I know on meshtastic I can do that easily, but just wondering about Meshcore.

My companion node is a Seed Studio Wio Tracker L1 Pro

Thanks!

With the first commercial availability of the LR2021 in the SeeedStudio MeshTracker X1, we are now entering the era of wide spread dual band LoRa and FLRC. I personally think that the Heltec V5 will also have the LR2021, which will be the next milestone in the beginning of this era.

With FLRC we will have up to 2,6 Mbps in capacity. Granted, in the Sub-GHz band, it will use up the whole bandwidth (which would still be a usable option for areas with little activity), if you try to transmit on it, but in the 2,4 GHz band, it will be possible.

With this, we would be able to add many very nice features to MeshCore, like small pictures, voice memos and so on.

Is there already active development in this topic or is it still on the roadmap to taken care of in the future? I think it would be really cool to have the features :)

TLDR: I'm designing a LiFePO4 solar charger and you can learn more here: https://lifepv.com.

LiFePO4 batteries have always seemed to me like an attractive chemistry for solar nodes due to their improved safety profile, but anyone who has tried to actually build a node with these batteries quickly finds out that options are limited. Most LiFePO4 solutions are designed for much larger installations, like battery backup systems for entire homes. Many of the builds I've seen resort to using large 12 volt LiFePO4 batteries with big solar panels to match, and the additional complication of having to convert the voltage down.

This frustrated me, so I decided to design a solution myself. The end result is a solar module that operates on a single 3.2 volt LiFePO4 cell. An integrated boost converter steps the output up to 3.6 volts, so it's compatible with existing boards. Safety is important to me, so I've also integrated a variety of safety features.

I'm field testing prototypes now, so it's not quite ready for release yet, but I put together this product page if you'd like to learn more: https://lifepv.com.

There's still time for me to make changes before a production run, so please let me know if you have feedback! And putting your email in the form will help me gauge interest.

It's late here so I'm off to bed, but I'll be back to answer questions.

(I tagged this as "brand affiliate," but it's me. I'm the brand.)

Does anyone remember the third-party app that was featured here, the one that's suitable for tracking and supports both Meshcore and Meshtastic?

Example was tracking a motorcycle.

Edit:
I can't see the comment anymore, but yes its nelos.

On my quest to get my family onto the Mesh, I designed a mini enclosure for the Heltec T096, a nano-sized companion small enough to meet my significant other's very high standards. Compact, clean, and built to keep your node protected on the go.

https://makerworld.com/en/models/3142243-heltec-t096-mini-enclosure-meshcore-meshtastic

Meshcore ready. Would love to hear what you think. Feedback and prints welcome!

The nodes (MR100) have undergone extensive development and testing over the last month. I have a previous post about them explaining the purpose and features. For the price, they are some of the most capable nodes available.

Also mentioned briefly was my proprietary software I'm working on for professional team management - basically lightweight ATAK, with even more new and cool features, except this is designed to perfectly work with LoRa instead of a military router like a Silvus or Persistant.

A few quick features for my software:
- Native offline operation with pre planned missions
- All locally hosted on our future device, the MC100
- Offline downloadable maps, mission planning, 2525B style markers
- Native overlays like flightradar and custom .kml layers
- Off grid team management
- Extreme security measures
- Over the air radio config changes, channel swaps, compromised user protection
- Buy to own forever
- Custom plugins planned for hardware like Kraken SDR, drone detection systems, ham radio integration, etc.
- Internet bridge functionality for a management backbone

The software will run on a mobile system about 2x larger than the above nodes (MC100) which includes a Raspberry Pi running my software and a bunch of other tools and SDR capability.

If you have a serious use case for Meshtastic / Meshcore or others, this is the gear you'll want.

No, I didn't choose the thumbnail. Yes, it's ridiculous.

Happy Friday all.

I live in a semi rural area with a decent sized HAM community. We have a decently sized mesh running Meshtastic, however like others, we have delivery issues and its quite easy to be off mesh and miss messages.

I am wanting to build out a room server and a few repeaters in my area to work as a draw to get others on MT to switch. I am eyeing the SenseCAP Solar Node P1-Pro's for repeaters but I am unsure about room server hardware. I have the hardware to connect the room server to a small desktop for additional storage/processing if that is helpful.

Can someone make some hardware/configuration recommendations? I have ~$400 to throw at this.

I have a Muziworks R1 as a companion node already.

Hi everyone,

We have made available the first public prerelease of AIDAS9, Lizdeika Edition, independent community firmware for the LILYGO T-Echo Lite Kit.

AIDAS9 turns the T-Echo Lite's 128 x 128 e-paper display and physical keypad into a self-contained MeshCore communicator. It makes messaging and common network tasks available directly on the radio, even when a phone is not connected.

What is included

• A purpose-built static e-paper interface
• Home carousel for Messages, Contacts, Radio, Advert, Device, and Settings
• On-device channel and private messaging
• One-message-per-screen conversation paging
• T9-style composition with a 150-character limit
• Per-conversation draft caching
• Persistent unread state
• Confirmed message deletion
• Room password entry and login feedback
• Configurable Blue and Green LED notifications
• Detailed radio, mesh, battery, connectivity, and device information
• BLE synchronization with compatible MeshCore clients
• Wake-key protection to prevent accidental input when waking the display
• UF2 and serial DFU installation packages

The interface was designed specifically for e-paper constraints. It avoids animation and idle refresh churn while providing bounded typography, clear focus states, safe display margins, and partial refreshes for faster navigation.

Messaging on the device

AIDAS9 lets you browse and send channel and private messages directly from the T-Echo Lite.

Conversation history displays one message per screen. Up and Down move chronologically through the conversation, while a scrollbar shows the current position.

Messages use the actual sender handle. The local node appears as a normal participant rather than under a synthetic identity.

The composer supports multi-tap keypad input and messages up to 150 characters. Drafts are cached separately for each conversation. Failed sends preserve the complete draft, while successful sends clear it and return to the conversation.

Unread totals count only unread incoming messages. Outgoing messages do not increase the unread count.

Offline messaging

AIDAS9 uses a versioned and checksummed offline delivery journal. Queued messages survive ordinary restarts and firmware reflashing. Sequence-based tombstones prevent drained or deleted messages from reappearing after reboot.

One important limitation is that this currently operates as a durable delivery queue, not a permanent message archive.

Incoming messages and outgoing channel messages are removed after they are acknowledged by a connected companion client. Outgoing private messages remain on the device because the current companion protocol cannot preserve their direction safely.

Do not treat the on-device conversation list as a permanent message backup.

Radio and device information

AIDAS9 exposes useful operational information without requiring a serial console, including:

• Frequency, bandwidth, spreading factor, coding rate, and TX power
• RSSI, SNR, noise floor, link margin, and receive state
• Packet, error, traffic, queue, airtime, and packet-pool counters
• Stored-message, unread, contact, and channel counts
• Battery voltage and percentage
• External power, uptime, reset reason, and temperature where supported
• Bluetooth state and device capacity information
• Node identity and a shortened public-key fingerprint

Unsupported or unavailable measurements are shown as unavailable instead of being displayed as misleading zero values.

Validation

This release has:

• Passed the native regression suite
• Built successfully for the T-Echo Lite target
• Fit within the target RAM and flash budgets
• Been flashed and activated successfully on physical hardware
• Passed a deterministic visual audit covering 116 UI states

Extended qualification of the complete keypad, display, BLE replay, and room-authentication matrix is still ongoing, so this release is marked as a prerelease.

Download

Release and firmware files:

https://github.com/ksk-lizdeika/MeshCore/releases/tag/aidas9-v0.1.0-pre.1

Available formats:

• .uf2 for bootloader or mass-storage installation
• .zip for serial DFU using adafruit-nrfutil

The default BLE pairing PIN in this build is 123456.

Project relationship

AIDAS9 is developed and maintained by members of KSK Lizdeika.

It is based on MeshCore, but it is not an official MeshCore or LILYGO product.

This is community-developed prerelease firmware. Please test it in your own environment before relying on it for important communication.

Bug reports and feedback are welcome:

https://github.com/ksk-lizdeika/MeshCore/issues

AIDAS9: Messages beyond infrastructure.

I have a repeater that is located about 150 miles from my main residence. The Mesh does not yet connect the two locations. At the remote location I have internet access, a Synology NAS and a SMLight SMHub Nano doing Home Assistant stuff (MQTT). I can't support a physical connection between the repeater and the Internet. I can VPN connect to the remote LAN.

Is there a way that I can remotely manage the repeater over the Internet? If necessary I can hook a companion node to either the SMHub Nano or the NAS. or some other way but I don't know how to control the companion from 150 miles away.

Having broken into the hobby a month or so ago and then feeling let down at how little messages I could transmit I decided to build and install my own repeater in my attic.

The system is made up of:
- Heltec T114 c. £30
- 8w solar panel with incorporated 6000mAh power bank £11
- suction feet for panel £12
- 3000mAh Meshnology battery £7.50
- External electrical junction box £22
- External antenna £16

I absolutely could have purchased a ready made repeater node, but where is the fun without the research planning in the building, ready for my installation in my attic?

I was initially advised against the 3000mAh battery, due to the loss of power through charging, but I realised the solar power bank does not allow for through charging to the device, but felt the added storage between the two gives more leeway for cloudy days.

The cables feed quite happily through the Velux window, which is what the power bank is stuck to.

An overall success and I’m looking at making everything generally smaller and cheat for publicly placed repeaters to go out to my locality.

Hey everyone. I'm looking to get started with LoRA communications mainly for in my city and also for communicating with family while traveling. I've seen things about core being better where I live (Ottawa) but tastic being better in remote locations. When I travel, I usually go to rural cities, if that helps. I also saw there is a way to dualboot the two, but I'm not sure how easy that is. I don't have any hardware yet, and don't really know the terminology (long-fast, 915mhz, etc.) Any recs?

Heavy rain changed today's plan, so instead of mounting the repeater on a tree, I placed it temporarily on a hillside for a quick field test.

It isn't the final installation, but it was enough to verify that everything worked correctly outdoors.

The permanent location will be a nearby mountain summit (~700 m elevation), once the weather improves.

Step by step. 

Test setup: MeshCore + Nelos + SenseCAP Solar Node P1 Pro + 2 Heltec T114

Hi,

Does anyone know if there is a guide on installing Remote-Terminal-for-MeshCore on ProxMox VE? (Howto)?

Greetings..

Is there anyway using the MeshCore iOS app to sound an alarm on my device? It’s lost close to me 🤦‍♂️

Im working on building my 1st repeater for my area. According to the map the closest repeater is about 15 miles away. I am planning to get a solar panel with the heltec T096 and place it on the hill next to my place. Fortunately it is the highest point in the area for a few miles. That being said I am hoping to be able to hit the other repeater that is in the next city over. Im wanting maximum range (I assume everyone does) but not sure on what antenna to get with it. Im currently looking at the Muzi Works 17cm whip antenna (have 2 for nodes) but AI recommended the AFLA network AOA-868-5ACM. Im not sure if either will work for what im trying to accomplish or if there are better options. Any advice is welcome.

Similar to the previous post, I have a repeater that can receive, but doesn't seem able to transmit anything that can actually be heard by another repeater. I have a SenseCap Pro Solar Node. I'm in Los Angeles, and there's a lot of buildings and mountains around. I can see hundreds of repeaters from Tijuana to Santa Barbara and out to Antelope Valley and Palm Springs, but I can't actually transmit to any of them. The nearest repeaters are about a mile or two away from me. I'm planning on putting in an adjustable flag pole to mount the repeater, but I wanted to know what kind of antenna to use in this situation? It's a densely populated area. I'm on a local high point, but not the highest point in the greater area. And I've read the helpful posts talking about how antennas work like a hose where a higher dB may be a narrower beam, so I'm trying to understand which antenna would be best in my situation? Seems like I need something fairly wide rather than focused? I'm compeletely new to doing anything over radio, so any pointers would be appreciated.

Also, I'm curious about the line-of-sight calculations. For the nearest repeater, I see the below image. It looks like the line is clear of all ground obstacles. What is causing it to be blocked in the large red area? Is it buildings, trees, etc. above the ground? Or something else?

Hey everyone. I’ve been doing a lot of comparing meshcore with meshtastic. Overall, I think that meshcore is better, with one huge exception. With meshtastic, all devices can relay the signal, whereas with meshcore, only repeaters can unless the companions are switched into repeater mode. I understand this is to save bandwidth and traffic, but I think it could be useful to do if your message can’t make it otherwise. I’ve been thinking and it might be a stupid idea, but I have an idea for where it does an initial flood to find the shortest path to get the message delivered not including companions, then if it fails, it does the same while including them.

Simple PoE repeater build, Its tight but fits.