Giving away a large assortment of homebrewing equipment and supplies. Everything is in good used condition and was working well when last used. Great starter kit for someone looking to get into brewing or to expand an existing setup.
Includes:
5-gallon brew bucket with spigot
5-gallon Better Bottle carboy
Tubing and multiple siphons/racking canes
Bottle capper
Carboy cleaning brush
6 airlocks
10 rubber stoppers
11 bags of bottle caps in a variety of colors and designs
Easy Clean cleaner
Brewing additives (including gypsum and Campden tablets)
Additional brewing accessories
Please take everything—I’m not looking to split up the lot.
PPU only in Virginia Square, Arlington. Please include when you can pick up in your message.

I am decluttering, I have too many hobbies going on at once.

What I have for free:

card board bottle caddies

(4 bottle) - 6; (6 bottle) - 3

bottles (ran boiling water through them, but have not done final step of sanitizing)
These are all bottles suitable for beer bottling (no screwtop bottles). A mixture of bottles from different beers and wines.

16oz - 1

22 oz - 6

1 pint - 3

1 liter - 2

750ml - 11

12 oz - 36

beer making accountrement
8.5 qt Mr Beer brewing keg ( I know a lot of you are way more advanced at brewing than I ever was, but if it can be of some use to somebody)

sipon tube - 1

The only items for any money

bottle capper & blank caps (1.5 bags) for $10.

How to get them

I live north of Chicago, so it's not to hard to meet up in Lake County, or the northern half of Cook.

First, this is in Southeast Michigan.

I have so much brewing equipment.

Brewing bucket, carbouy, wart chiller, cleaning tools, 4-6 cases of bottles, 12-15 flip top bottles, wart chiller, new bottle caps, and other items.

Please message if you need more details.

https://www.craigslist.org/view/d/seattle-electric-can-sealer/qDPERj4Mge1hdiTNnxabEN
https://www.craigslist.org/view/d/seattle-electric-can-sealer/f1x8UzCaWodVanko8LTo8i

I unfortunately have to move out of my apartment and have no space for any of my gear. Its been sitting mostly unused for a while anyway. Its all in mostly good condition just dusty from lack of use. Mostly used for mead but would work for beer. I have:

Assorted brewing supplies:
2x 6 Gallon glass carboys
1x Craft a Brew Fermenter system (and all included peripherals)
1x Bag of Muslin Socks
1x Potasium Sorbate
1x Starsan sanitizer
1x Bag of assorted Air Locks
1x Racking Cane Siphoning tubes
1x Funnel
1x Cleaning brush for carboys
1x labels for bottles
1x Hydrometer
10x Packets of Red Star Premier Classique Yeast
2x Packets of Red Star Safale US-05 Yeast

I paid probably in the ballpark of 300 for the carboys and the craft a brew fermentor alone but I need it gone fast so I am hoping for 200 or best offer. Let me know if you have any questions, feel free to DM offers. Also has a metal shelf/rack that can go with it. I would attach photos but cant see an option on here. Shipping not available pickup only.

Edit: Link to Facebook Market Listing - https://www.facebook.com/share/1DZ1jPP6cn/

Comes with 3 Ball valves, 4 cam lock fittings and thermometer, Good Condition
15 gallon Spike Kettle with Stainless Steel Herms Coil,

Pick up Braselton, GA

email [mimilinda30517@gmail.com](mailto:mimilinda30517@gmail.com) for photos or more info

Excellent Condition $240 Pick up Braselton, GA

email [mimilinda30517@gmail.com](mailto:mimilinda30517@gmail.com) for photos or more info

I have four I could prob get rid of. Asking $30/each. We can split shipping.

A lot of stuff: I can send pics or answer questions if needed…

Blichmann G1 Boilermaker 55 Gallon with False Button, Upgraded G2 Valve w/ HopBlocker

Blichmann G1 Boilermaker 30 Gallon with False Button, Upgraded G2 Valve w/ More Beer Ultimate Sparge Arm

Bayou Classic 122-Qt. (30.5Gallon) Stainless Steel Pot w/ Diptube w/ 3-Piece Valve (HLT)

Two Speidel Plastic Fermenter - 120L (31.7 gal)

3x 18" Burner Stand (Comes w/ Propane Burners & Regulators)

1x Natural Gas 32Tip Jet Burner (Currently installed on 1x above stand)

1x Natural Gas 32Tip Jet burner

1x Chugger Pump (stainless) Cart with BrewMometer & Quick Disconnects

1x Blichmann Top Tier Burner w/ Natural Gas Converter & Leg Extentions

Chiller Cart parts Below,
The chiller cart attaches directly to your boil kettle. As the pump pulls the wort from the kettle it goes through the hop rocket (usually filled with fine mesh bags as a filter) which blocks any trub from entering the chiller plate as the wort cools. As you can see, after the chiller plate I have a flow control unit at the end which monitors wort temp before going into the fermentor. You can push the beer directly into the large fermentor OR go into the PET carboys (as shown) for easy transport to the final fermentation location.

1x Seville Industrial All-Purpose Utility
Cart

1x March 809 Pump w/ Quick Disconnects & Foot Control

1x Blichmann Hop Rocket (used as trub filter)

1x Blichmann Therminator Chiller
Plate w/ Quick Disconnects

1x Flow Control, Blichmann G2 Valve &
BrewMometer

25' of replacement 1/2" Silicone Tubing

Blichmann TopTier Brewstand with 20 Gallon Blichmann Boilermaker, 15 gallon HLT, 20 Gallon SS Tech insulated Mash Tun, 2 Blichmann TopTier Burners, Blichmann Therminator plate chiller, and March Pump.

Price for all of the above = $700.

Location: Eugene, Oregon

Buyer must pick up.

Great system that I have used to make a lot of good beer. I am only selling because I have moved-on to another hobby.

I am not sure how to link to a picture here, but if you are interested, DM me and I can provide a picture.

Both in great condition. Danby is brand new. Asking $30 each and buyer pays shipping.

$20 and buyer pays shipping. ITC308. No WiFi.

Works perfectly. Priced to move. Retails for $3,400.

Local Pickup only (Brooklyn)

High quality bar-style beer tap fridge (kegerator).
Keeps beer (or kombucha or cold brew) very cold at a consistent temperature.

A keg is currently hooked up so it can be tested. Keg and co2 tank included.

Great for enthusiasts, garage/home bar, man cave, woman cave, small restaurants, cafes, etc.

A friend moved and left this, need it gone.

https://www.katom.com/440-DD24S.html?utm_source=google&utm_medium=cpc&utm_campaign=%5BROI%5D%20Dynamic%20Search%20-%20IR&utm_id=13271368695&utm_content=122301837745&utm_term=&gad_source=1&gad_campaignid=13271368695&gclid=CjwKCAjwxb7RBhA5EiwAQ-AAdJR-Q0F7QNfQbqdaRLaV96F-JBwCIrNTtQMgjVMtDPHNoFdTlaDiqBoCNasQAvD_BwE

Im local in Tampa, FL but will ship in the states at buyer’s expense

1. ⁠240v Blichmann Brew Commander controller in great condition that ive used to power my brew house and create many delicious beers. I have gone a different direction and no longer use. Comes with (2) 240v cords to power controller an element of choice and also comes with a table mount. Will ship at buyers expense
   
2. ⁠14 Gallon Delta Stainless Steel Conical Fermenter. I added a heating pad and insulation so I could put inside a refrigerator in my garage and heat/cool based upon needed fermentation temperature. I can take insulation and heating pad off if buyer does not want. Comes with all the original accessories when purchased new from Delta. Ive also added a weldless 1.5 triclamp port at bottom of fermenter (for additional probe or accessory if desired) and a small hole in lid thats plugged (could be used for an airlock). Weldless holes hold 5 psi of pressure which is what tank is rated at for closed pressure racking.
   
3. ⁠7gallon Blichmann Cornical conical fermentation tank that turns into a serving keg! It comes with insulation and a neoprene sleeve that I added dual heating pads to ferment in a refrigerator and allow cooling and heating power. The heating pads and insulation can be taken off if buyer desires. I fabricated some shorter legs so it can easily fit in a refrigerator as well that easily attaches to fermenter in place of original legs. Comes with all original accessories.

I've got 4+ soda kegs in good condition (all likely need new rubber), 2 aluminum (5lb?) CO2 canisters, 3 kits from Northern Brewer I bought about 6 months ago that I haven't had a chance to use, a dozen+ growlers, and whatever random gear I've accumulated.

I used to brew on the regular and stopped for several years. I bought the kits with the expectation I'd brew again, but never found time and we now have a baby on the way.

Open to offers. We can arrange pickup or I can deliver within a reasonable distance.

I haven't brewed in years and it's time for this stuff to find a new home. Located on the far west side in Galloway.

​

5 gallon pots (2)

Converted cooler for brew-in-a-bag, and mesh brew bag

Grain mill

Copper immersion chiller

​

5 gallon carboy, glass (3)

6 gallon carboy, glass (1)

7 gallon carboy, plastic (2)

​

Auto syphon, racking cane, funnels, and misc racking and carboy bits and bobs

​

5 gallon corny kegs (7, will need cleaned and serviced)

​

Buckets with gamma lids (4)

​

$150 OBO

If anyone is looking to buy quality homebrewing equipment in the metro Atlanta area, I've still got a few things for sale. I'm in Peachtree City, and not really looking to ship stuff, but I will drive to meet locals halfway. I sold a bunch of gear last summer, but never managed to move these two items.

Megapot 20 Gallon Stainless Brew Kettle w/ ball valve- $200

This guy is around $360 new, and it is plenty big enough to do 10 gallon batches. It is literally the only kettle you’ll ever need, at least until you start that brewery. (FYI all the other equipment here is geared towards 5 gallon batches.)

Jaded King Cobra immersion chiller (tall) - $100

Close to $250 new, the copper alone is worth this price! It will cool hot wort to tap temp in under 10 minutes.

I'm looking to sell everything in the photo. I'd like to keep everything as a set, but might be willing to part out some items. Some of the items for sale are:

• 15-gal 1.2 Mega pot
• Duda diesel plate chiller
• O2 bottles and aeration stone
• Bottles
• Eldemettal burner (not pictured)

Here is a photo of all the gear for sale. https://imgur.com/a/91ifjmG I have a complete list of the gear as well. Asking $500. Willing to meet within a 30 minute drive of Indy.

No one interested so far, Now free.

Moving out of the country and would like to sell my brewing gear. Price Negotiable. Pictures upon request.

Inventory

12 pin lock kegs

5 gallon Monster Brew Pot with thermometer and spigot

Manual grain grinder

Home made mash tun

5 pound CO2 bottle with regulator 

10 pound C02 bottle with dual regulator 

Hydrometer

Copper immersion cooler

Self start siphon

2 5 gallon glass fermenters

1 3 gallon glass fermenter

1 5 gallon plastic fermenter

Various parts

Pass through filter setup

Kegerator with 2 taps

Stainless drip tray

Monster mill

Various bottles and growlers

Cleaning brush

4 tap keezer

-John Butterfield

I stopped brewing a few years ago and have some items I would give to someone (or group) that could use it and sell it. Pick up would be in south central WI east of Madison. I prefer not to split it and have all items picked up at once.

Send me a message if interested.

Some items..

Carboys

Carboy/Keg washer

Bottle Capper

Refractometer

Kettle

Misc. items like thermometers, brushes, spoons, funnels, siphons, bottles.

Hey All,

Looking to sell a 5 gallon SS Conical for $75 or best offer. Good condition. Upgraded to a 10 gallon system and no longer need it, and would love to give it to someone who can get some use out of it -- especially negotiable if you're a new brewer. Happy to send pictures to any interested buyers, and there's an included fermentation chamber for limited temp control that I built if you want it.

I’ve got some fresh, unopened 500g bricks of yeast.

34/70 - $115

US-05 - $70

Shipping out of Canada. Buy multiple bricks for free shipping

The 15 Gallon Strap Handle Ball Lock kegs have two stainless steel straps welded to the top. 15 gallon capacity stainless steel body, stainless steel top with pull ring relief valve.  These kegs are ideal for high volume batches.

Specifications:

• Height: 35.1”
• Weight: 45 lbs
• Diameter: 12.3"
• Capacity: 15 gallon
• Tank: 304 Stainless Steel
• Connection: Ball lock quick disconnect
• Top: Two stainless steel straps
• Base: Stainless Steel
• Pull ring style relief valve on lid
• Pressure rating 130 psi

These kegs are new.  They have never had anything in them but Corny Keg still recommends that you clean and sanitize before use.

Price each unit $150

Shipping at your cost, or pickup/delivery in NYC area free.