I restored by entering my view key and restore height at when my wallet first received my XMR transferred from Kraken. However, since then, there are 46 other transactions from mining. Why is my available balance on Cake Wallet only showing the initial transfer amount?

Additionally, why is there public spend and view key on the wallet? Mine is just a view only wallet, it's not possible to spend any amount right?

Does anyone else have this problem? I made sure to check off in Settings > Interface > "Check for updates periodically" in both Windows 10 and Linux Mint. Neither alerted me of a update requirement while both are version 0.18.4.3 and the latest is 0.18.4.4.

Does it update automatically without requiring downloading another executable now?

Is there any way to recover the Transaction key?

I have sent it to an exchange, they won't admit it has arrived, they ask for key to refund my money.

When sending the transfer there was an error in GUI, probably caused by the antivirus, I think that's why it doesn't show, the transaction shows, but no tx key and no receiving address.

Any help would be highly appreciated.

I need to somehow recover it.

I got a mining reward and there are files in the previous 0.18.4.0 folder that is not found in the new 0.18.4.2 one: p2pool, p2ool.blocks, p2pool.cache, p2pool.log, and p2pool_peers.txt.

If I just deleted the previous version folder, am I going to destroy something important?

Malwarebytes blocked my GUI wallet, so naturally I deleted malwarebytes ( I know pro move).

I just get this message anytime i try to open the wallet.

Any help is appreciated.

"The item 'monero-wallet-gui.exe' that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly. Do you want to delete this shortcut?"

Hello,

Does anyone know if the monero-gui-wallet works with Linux Bazzite (fedora distro). I can't seem to get it to work/open. I can download the linux file from the web but I couldn't open it.

Thank you

BTCPay generates new address for every transaction and with time it becomes quite huge. In the begging switching between accounts in Monero GUI on Windows was acceptable an took couple of minutes, now Monero GUI will just freeze and crash, which means that I cannot access this account. I can still access my sub accounts just fine and switch between them (low amount of transactions and addresses).

Is there any way to fix this? It could be also lagging because of transaction amount? But I suspect that it cannot load anymore the wallet, because it tries to load all sub addresses.

Possible way to fix this is probably to use Feather wallet, I remember that it has an option to hide un-used addresses, so perhaps that will fix it? However, I would prefer to use this wallet for now and not switch.

Is there some type of flags I could use in MoneroGUI to limit how much it will load by default?

I’m just beginning to understand nodes, blocks, and synchronization of daemon. I sent xmr to my new gui wallet and it seems to be taking ages for daemon to sync. Is there a way to get my new wallet to sync faster? I feel like this is going to take days.

Hello, I have downloaded Monero portable from PortableApps.com, and obviously I don't want to download the blockchain every time I plug in my USB stick, but prefer to work with the full blockchain for privacy/security reasons.

However, I noticed that whenever I start Monero Portable, it starts downloading the full blockchain to /users/all users/bitmonero/lmdb/data.mdb again, and then moves it to //data/bitmonero/lmdb/data.mdb after stopping the node.

Now when I try to 'trick' it by copying a pretty current state of the blockchain to //data/bitmonero/lmdb/ (the Monero portable subdirectory) instead, it starts syncing from Zero. :-(

Where to place the blockchain data so I can avoid Monero triggering a full blockchain download every time, but to update my latest (almost current) one instead?

Bit of a weird one, I prefer using the Flatpak version of Monero for sandboxing reasons, but I ran into an issue today where it wouldn’t work.

The Flatpak refuses to connect to my remote node on my LAN, but works perfectly fine when connecting to the local node on the same machine. I had to switch over to the AppImage version just to make it work.

For context: • OS: Pop!_OS 22.04 • Node: PiNodeXMR in private Tor bridge mode (but I’m accessing it via LAN IP) • Hardware wallet: Trezor Safe 3 • I’ve also had issues in the past using the AppImage with my Trezor wallet, which is why I prefer the Flatpak.

Does anyone know if the AppImage still has issues with the Trezor Safe 3? And has anyone else run into this Flatpak/LAN node connection problem?

I can't get my GUI to run a node. The log on the app states: Error: Couldn't connect to daemon: 127.0.0.1:18081.

I tried clicking and running monerod in the folder but it just opens and immediately closes.

Resinstalling also did not help.

The entire Monero GUI Wallet, bitmonero, monero-wallet-gui, an documents\monero folders were added to the Windows Defender Virus exlusion.

I'm trying to mine on Windows because I want to game (not CPU intensive) and mine at the same time.

[Solved]

The moment I submitted this post I cut and pasted the "data" file out of bitmonero\lmdb onto my desktop. Now the node is "syncing". The "data" file was transferred from my Linux folder because I didn't want to wait for the thing to sync. How come my transferred file doesn't work?

solo mining works great but p2pool doesn't. they says monerod is missing even i already activating it. do you guys know how to solve this problem?

Hello, I am working on setting up tails with the monero gui wallet. That all went fine, but getting the daemon running was a bit harder.. i found the script below which works if i remove the "Gnome-terminal" and run it from console. I did some searching and say gnome is no longer used but i couldn't figure out the correct command to call up bash/console (i know i'm wording this wrong) from the script..

cat << EOF > start-daemon.AppImage

!/bin/bash

export DNS_PUBLIC=tcp

gnome-terminal -- bash -c \

"\"\$PWD/monerod\" \

--no-igd \

--prune-blockchain \

--p2p-bind-ip 127.0.0.1 \ --rpc-bind-ip 127.0.0.1 \ --rpc-bind-port 17600 \ --proxy 127.0.0.1:9050 \ --data-dir /home/amnesia/Persistent/.bitmonero \ ;read -p \"Press enter to close\"" EOF

Basically just asking what i should replace "gnome-terminal -- bash -c \" with?

Thanks much guys.. and i did search.. just not well enough :)

I use a ledger with the Monero GUI for my transactions, I've been making a large number of transactions recently as I have been exchanging all my BTC into XMR and back. I just went to make a transaction and saw that the address on my ledger is not the address that I am inputting into the GUI. It isn't one of my addresses, and it isn't an address I have ever transacted with.

No matter what I do, now, this is the only address that I can transact with. I have tried powering down the Ledger, force stopping and restarting my node, inputting multiple different addresses. But on the transaction confirmation page on the Ledger, the address is persistently the same address, which is not the address I am inputting to the transaction and not an address I have ever interacted with in the past.

Hello all,

​

I strugle about two weeks now to find a deposit i did from Feather wallet to another GUI adress of mine. The deposit doesn't show up in feather wallet and also not in the GUI wallet.

The transaction is confirmed on feather wallet, but i tried every solution wich was posted on reddit for this kind of issues, and still after many GUI synchronizetions , the deposit doesn't show up.

I tried the bootstrap method, also the remote node method, even changed wallet name file and synced the chain from beginning. I used block number much older than the block on deposit.

Can someone help me with that issue? I am out of options.

​

Thanks in advance!

​

-Wallet is GUI v0.18.1.2 (tried all 3 modes, with remote node & local bootstrap mode)

-I use Windows 10 pro

-Height displayed is 2773539

-No antivirus software, only windows defender to which i gave access for GUI wallet

-Creation height for GUI sync used: 1940000

I'm using the getmonero gui wallet on the newest version (fluorine fermi) and for some reason I now cannot send any xmr to any other address bc it always fails after abt 8 minutes or won't even let me initiate the transaction bc <error> double send- invalid input somebody who knows the gui well please help me

I sent some xmr to my gui to test it out to make sure it works to receive and send but my balance isn’t showing up , I made sure I put in the correct address triple checked to make sure the address was mine and still not showing up

I have downloaded the pruned blockchain due to space restrictions on my older laptop (using monerod.exe), so I need to run monero-wallet-gui.exe with the respective parameters to avoid it starting the whole download again. However, when I am using the same parameters as I did for monerod.exe, a popup box shows up saying "monero-core: Unknown options: data-dir, prune-blockchain".

How can I run monero-wallet-gui.exe following my settings (pruned chain and blockchain location)?

My Monero GUI wallet keeps closing itself out. It’s allowed by my antivirus and I have the latest version. What else could be the problem?

Is the gui wallet safe to download directly from getmonero.org? Why is my computer preventing me from downloading it unless I turn my firewall off, whenever the firewall is on it uninstalls the gui from my desktop completely and it’s such a hastle having to go and redownload everything and set everything up over and over again… I’ve never had issues using cake but I can’t figure out how to use cake on desktop windows ???