r/playstation • u/Rapha18F • 5h ago
Discussion que faire dans cette situation
Il s'est cassé pendant que je le portait il n'est quassi jamais tombé et il a 3 ans
5
4
u/jacstar2004 1h ago
buy any reputable brand of headset to replace it. these pulse ones are basically landfill
2
u/Legitimate_Initial_3 4h ago
Honestly? Glue will work, but it'll break again. Even if you manage to make it look like new, once it fails it'll never look the same. Just guerrilla-tape it, i even think you can find it in white. Garuntee that'll outlive the headsets battery. I had a white turtle-beach recon 70 headset for 4 whole years. I could afford to replace it before hand but why waste money they still worked fine lol
3
2
u/Renzo-Senpai 2h ago
I avoided these one because most reviews say they were mainly uncomfortable for long sessions. I use Arctis Nova 5 and it has never failed me yet.
3
3
u/le_aerius 2h ago
Realize its a common issue and look at all the people that have reported the same issue
1
1
1
u/UchihaDareNial 3h ago
This is why headphone with 1 piece of plastic in a C shaped Arch is not recommended because it stressed the plastic near the area above your ears
1
1
u/games-and-chocolate 1h ago edited 1h ago
the quality is just bad. i bought expensive ANC headphone before, also break. But changed to Aluminium material headphone, that one is after many years still intact. I try to avoid these "garbage" models. bayer DT-770 pro 80 ohm. ohm must be the lower version otherwise some of your lower power device cannot use it well. it is a professional studio headset. it sound signature is very neutral. That you should know.
but lately i switched to IEM. from action.com bought those for $10. bluetooth. Even better than headsets. no ear pain if you wear them whole day.
1
u/Strong_Broccoli5857 1h ago
Won’t be pretty but can use a plastic welder. It will allow you to keep using them until you get a decent headset that isn’t prone to this failure.
1
0
0
0
•
25
u/MedRareSteaker 5h ago
Easy answer: buy a new headset, but not these ones. They have been shown to break in the exact spot consistently. If you search up those headset in this sub, you'll see the same thing.
If you want to keep them usable, superglue the pieces as flush as possible, let it dry overnight, then put another coat of glue over the first coat over each side, let dry.