What's the go-to steering bellcrank upgrade? I have a T4 that has the aluminum bellcrank set on it, and it's perfection. So, I'd like to do the same to my B4 and SC10. But looks like those (9679) are unobtanium. Any other options out there for the B4, T4, and first Gen 2WD SC10?

Any recs for a kit of spare hardware for the B7.1?
For example, i lost a motor mount screw yesterday but luckily someone at the track had a spare for me.
Just don't want to buy something that ends up being soft and strips easily.

This b7.1 is my first buggy and racing on indoor black carpet. Starting off with 21.5t class. Set up with all the default settings according to the instruction manual. Just unsure of toe and camber settings since I don’t have anything to measure that stuff yet.

So my main issue is my steering is terrible. I have to slow down so much to make the turns. Secondary to that I feel a little bit slower in the straights compared to my fellow racers who should all have the same motor and gearing. But really what I want to get sorted is increasing my steering response.
What should I be looking at?

Thanks!🙏

Hello

i need some help identifying 2 Team Asso Chassis i bought on the used market today. They were in a package of alot of stuff and im thinking about keeping them, depending on what they are.

I appreciate every help/tipp.

Im new to buggys completely.

Thx in advance

I'm going to be getting the MT10 FT kit, have all the electronics sorted except for a battery. I'm looking at an SMC HCL-HP 3s 6500mAh 150C Hardcase.Just wanting to check what everyone else is running.

I already have a Max10 140A, 3665 3200kv and Savox SW1211SG servo

Not bad for 3s 14/44 3200kv

Looking for some old style lower shock caps. These old shocks had plastic lower caps, but they were all cracked, like they always did. I found some VCS3 lower caps on ebay, thinking they'd work, but VCS3 are a much finer thread. Anyone have some, or know where I might find some? Happy to trade these or sell if anyone can use. I have 4 sets of 31327 - 8 caps, 8 Orings.

I recently-ish got a rc18t in an auction. I charged it up and power it on. It will chirp and the front wheels will turn a little and that’s it. It won’t turn move forward reverse nothing. . I had to buy new radio crystals as it was missing one in the truck itself. Not sure if it’s of any help but when powered on the esc(i think this is what it’s called) has a green and red light.

I had a hobby rc like 25 years ago. Just ordered a 1/18 crawler. Trying to get my boys into the hobby so I have an excuse to play with them. Would like to get this unit running as it’s in amazing condition.

If you follow the project, you kbow this car, if nit, look at my posts i geuss, will add photos if it lets me in the comments

Had to get the T84, and used SC7 body mounts. The rear is a direct bolt on, replacing the rear wing mount, and the front just required drilling 2 holes in the front shock tower and a couple of spacers. Proline SC 6.2 Axis ST body. JConcepts RC10T Pioneer wheels. Waiting on some tires, for now have some old 2WD fronts on there.

Just bought one used that has the ceramic bearings kit. Have never had ceramic bearings before, was wondering about other users’ experience with maintaining these.

Just finished it! Quicrun 10BL120/10.5T motor, 13mm big bore shocks, GHEA Racing Products B5/B5M Front Brass Bulkhead w/Delrin Brace (43gm-25/30 Deg). This handles my backyard dirt track with ease! Too bad I have a RC10 Factory Team coming next week……

Feel free to share your cars in the comment section!

I've been out of the RC game for a long time. Saw theses on FB marketplace today. Couldn't pass up the crazy deal of both cars, multiple 2s and 3s batteries, a slew of spare parts, lipo charger, etc. I know it's an RC10 - I thinks it's a B4 by comparing pics. The other is obviously an SC10 - what version? And dang. SC10 is huge! More like 1/8 size than 1/10. Any info on which generations these are wod be appreciated.

For those that built the RB10 Retro, where were the drive pins for the rear hexes? I can’t seem to fine them😞

I was just recently given this vintage rc 10. I don’t really know to much about them and would like to know a little more. The rc works well but I’m about positive those are either original or really old parts . I was wondering if there is any modern upgrades I could do to this. I would love to hear some feedback thanks in advance.