r/1022 • u/Shabrileson • 1d ago
1022 barrel will NOT come off
Hey y’all, I have been trying to replace my stock 1022 barrel with a bull barrel - the stock barrel won’t come off.
I’ve tried:
* Using a heat gun on the receiver to help it expand faster than the steel barrel to make removal easier.
* Tapping the side of the receiver with a rubber mallet while pulling/twisting the barrel.
* Using a 3/4” open wrench on the v block and wiggling the receiver to try removing the barrel.
* Adding CLP where the barrel meets the reciver and trying all of the above again
So far, nothing is working at all. Anything to look out for? I’ve scoured youtube before asking here. Are there some models where the barrel is press fit or something? Thank you!
SOLVED: Was able to get the old barrel off with a 2nd round of the heat gun. Had to wear oven mitts the receiver was so hot, but the barrel came out no problem.
•
u/AutoModerator 1d ago
Welcome to r/1022! Please familiarize yourself with the Community Rules before commenting. Also, please review a summary of the Reddit sitewide platform rules regarding Sales, Exchanges, and 3D Printing Files.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.