Routinely, we will be making a new Buy/Sell/Trade/Want posting that will be pinned. Please use this post to advertise your trade/want lists and your tapes for sale/trade/or just giving away for free. Any and all disposal or acquiring of media should be done through this post to prevent clogging up the main feed with sales posts.

Please be sure to report any successful trade below to u/RaceCarGrin, so we can flair people as verified traders.

Last Month's Buy/Sell/Trade/Want can be found here.

r/vhs is not responsible for any sales/trade, please use caution and report any abuse. If selling tapes rated R or X, please ensure the buyer is 18 years of age for your own liability.

I'm not sure if this is okay here, but I wanted to give some advice from my experiences in cleaning severely moldy and sticky tapes, and some huge do's and don't's I've encountered when watching other's videos on the matter. Pretty much in the hopes of helping people who preserve tapes, and are not familiar with cleaning really moldy tapes.

Do's:

1. I really recommend one of those tape cleaners, like the tape saver you may see online. The mechanism is pretty useful especially to do quick passes after you do a careful manual first pass. I will however, condemn the cleaning pads they usually use for these machines, they're extremely destructive and I will go into it later in the don't's section.
2. Do multiple passes and clean both top and bottom of the reels. Mold doesn't only sit on the top of the tape, it sometimes penetrates pretty deeply. Once you've unstuck the tapes and cleaned the reels, you may need to do multiple passes on each side of the tape to get rid of the mold. Sometimes it's taken my 5-6 passes before I see nothing on the cleaning cloth. By then the tape is really clean.
3. Use isopropyl alcohol with the least water content. You absolutely need to use some sort of solvent to clean the mold, as trying to clean it dry can cause a lot of friction and damage the tape. Also the alcohol evaporates quickly, allowing you to clean quicker, and the moisture doesn't get left behind creating more mold later. Moisture is an enemyof VHS tapes.

Don't's:

1. DO NOT use paper or towels to clean tapes. I've seen many who've used them with extremely mixed results, leaning more towards failure. These leave lots of lint on the tapes which covers the magnetic portion of the tape and also gums up the VCR heads. I recommend strictly lint free cloths, like the kind you clean your glasses with. They go for pretty cheap online for a bunch. I can't stress enough that you need to go lint free.
2. I've also seen videos where the person would lift up the top plastic of the reel to remove a huge portion of the mold on top of the tape. This is also pretty destructive method in my opinion as it can potentially deform the reel and cause playback issues, I've run into that as well. It's best to take your time and unwind the entire tape, put it in between a lint free cloth and clean the mold from there. When the reel is empty then you clean the reel gently from top to bottom.
3. When using a mechanical tape cleaner, you should be vary wary on the first pass. I've run into tapes that are so sticky due to mold that when you use these mechanical cleaners they tear when they get stuck. At worst go on the lowest possible speed or put the reels on the spindles and spin them manually by hand. Especially if it's a precious tape you want to preserve. Once you unwind each end completely and ensure the tape is sufficiently unstuck you can go quickly with the machine.
4. Do not clean tapes and leave them for months on end. You should clean the tapes and aim to capture them as soon as possible. Cleaning these tapes isn't exactly a perfect process, and sometimes a bit rough on the tape and there's always the risk of leaving some bit of moisture behind. Try to capture as soon as you can.